4. When the ALARM time is displayed by holding C. Depressing B can turn on or off the hourly chime altemately, as shown in Fig. 5. hourly chime on hourly chime off Bx1 HOLDING C Fig. 5 5. From the normal time display mode press B 2 times can go into the ALARM time setting mode with the ALARM hour digits and the ALARM SET indicator blinking, press A to set the digits and C to select the digits, as shown in Fig. 6. The ALARM is armed automatically if the contents have been set.
Cx1 Ax1 Cx1 Cx1 Cx1 Cx1 A A Cx1 Ax1 RESETS SEC Cx1 Cx1 Cx1 Ax1 A Cx1 A Bx1 Fig. 8 CHRONOGRAPH MODE: 1. From the normal time mode, depress B to go to the CHRONO mode, as shown in Fig. 9. Depress A to start (as shown in Fig. 10) and stop (as shown in Fig. 11) the Chronograph. When the chronograph is running depressing C will show the SPLIT time at which C is depressed (Fig. 12). When the chronograph is stopped depressing C will reset the chronograph to zero, The chronograph displays MIN.
CARE OF YOUR STOPWATCH WATER RESISTANCE - The stopwatch is designed to withstand accidental contact with water such as splashes or rain, but it is not designed for use in water. Do not operate the buttons when the stopwatch is wet. TEMPERATURE - Do not leave your stopwatch under direct sunlight or in very high temperatures for a long time, the display may become black. Do not leave your stopwatch in very low temperature as this may cause a slight time loss or gain and the change of digits becomes slow.