TDS
Product Name
CeilingMAX
Manufacturer’s Name
Acoustic Ceiling Products, L.L.C.
July 22, 2008 Page 1
PRODUCT FEATURES
• BASIC USES / RELATED USES
! PVC grid system, surface mounted to substrate, Providing acoustic applications in low
clearance areas.
! Solid vinyl construction eliminated rust and white corrosion.
! Acoustic tile/panels not included.
• PRODUCT ATTRIBUTES AND CHARACTERISTICS
! “0” clearance or direct mount grid system
! Snap-in technology is easy to use and install
! Snap-out technology provides ease of replacement or accessibility.
! Provides access to plenum above.
! Attaches directly over existing plaster, gypsum board, open joists, or glue up tiles
! Flexible to fit any 610 x 610 mm (24 x 24 inches) or 610 x 1220 mm (24 x 48 inches) flat
lay in or revealed edge ceiling tile 19.05mm or (! inch) thick dimensional tile.
! No demolition required prior to installation.
! Available for standard 22 mm (7/8) or 25 (1 inch) thick dimensional tile (contact
manufacture for proper grid selection)
! Intermediate duty class.
• ENVIRONMENTAL
! Product may be recycled upon final disposal.
! Jobsite waste can be placed in recycling containers.
• SELECTION CRITERIA
! Developed for applications requiring a ceiling that is directly applied to an existing
surface such as an existing plaster, gypsum board or paste-up ceilings or to wood joists.
! Designed for applications where the minimum possible overall depth of system is
necessary because of limited space or other reasons.
! Tiles can be replaced or removed easily for access or any other reason by unsnapping the
PVC grid system.
! Suitable spaces for application include Schools and Universities, Hospitals and
Healthcare Facilities, Food Manufacturing and Processing Plants, Restaurants, Hotels and
Hospitality Properties, Gymnasiums and Auditoriums, Churches, and Airports.
• APPLICABLE STANDARDS, RELATED REFERENCES
! ASTM C665 - Specification for Mineral-Fiber Blanket Thermal Insulation for Light
Frame Construction and Manufactured Housing.
! ASTM D638 – Standard Test Method for Tensile Properties of Plastics.
! ASTM D696 – Standard Test Method for Coefficient of Linear Thermal Expansion of
Plastics Between –30°C and 30°C With a Vitreous Silica Dilatometer.
! ASTM D790 – Standard Test Methods for Flexural Properties of Un-reinforced and
Reinforced Plastics and Electrical Insulating Materials.