Energy Guide

TECHNICAL DATA SHEET
Soniguard® Insulation
!
Ceilume: The Smart Ceiling Tile®
9270 Graton Road ! Graton, CA 95444 ! [phone] ! www.ceilume.com
Page 1 of 1
PHYSICAL PROPERTIES
!
ITEM
PROPERTIES
UNIT
TEST METHOD/CODE
R&D INFORMATION
1
Composition
Soniguard® Insulation is a
thermal-bonded, polyester-
fiber, non-woven batting.
2
Bonding
Matrix is bonded with 100%
polyester fibers through
thermal setting, with up to 50%
recycled content for an
ecologically conscious solution.
3
Characteristics
Soniguard® is made using the
same fibers you touch and use
everyday in apparel, bed
linens, and upholstery –
making it safe for direct contact
with your skin – and it is
engineered for superior thermal
and acoustic performance with
no long-term degradation in
energy efficiency.
4
Thermal Resistance
R-value
ASTM C518
R 6
5
Thermal Conductivity
Btu*in/ft2*hr*°F
ASTM C518
0.27
6
Water Vapor Sorption
% per cm
3
ASTM C1104-06
0.0033% – Meets requirement.
7
Flammability
(Surface Burn)
Flame Spread
Smoke Development
ASTM E84
Class A Fire-Rated
< 25 Flame Spread
< 450 Smoke Development
8
Corrosion, Fungi, Odor
Tested
ASTM C665
ASTM C1338
ASTM C1304
Does not promote corrosion,
growth, or odor.
9
Mold Growth
Scale 0 - 4
ASTM G21
0 – No mold growth.
We do not undertake any liability for the results of usage of these products. The technical data set forth in this data sheet reflects our best knowledge at
the time of issue. The data sheet is subject to changes pursuant to new developments and findings, and a similar reservation applies to the properties of
the products described.