Specification

MSDS NO. 006
Page 2 of 3
SECTION 4 – FIRE AND EXPLOSION DATA
FLASH POINT
Solid Material > 200°F
EXTINGUISHING MEDIA
Water, foam, and dry chemical
SPECIAL FIRE FIGHTING PROCEDURES /
UNUSUAL FIRE OR EXPLOSION HAZARDS
All fire fighters should wear full emergency equipment, with a self-
contained breathing apparatus, and full protective clothing. During a
fire, irritating vapors and toxic gases may be generated.
SECTION 5 – HEALTH EFFECTS DATA
HUMAN EFFECTS OF OVEREXPOSURE
No adverse health effects have been observed. Human experience
indicates no irritation upon skin contact with PET fiber.
SECTION 6 – FIRST AID
EYES
Irrigate immediately with water for at least 5 minutes. Mechanical effects only.
SKIN
No adverse effects anticipated by this route of exposure incidental to proper
industrial handling.
INHALATION
Remove to fresh air.
SECTION 7 – PERSONAL PROTECTION RECOMMENDATIONS
Safety glasses are advisable when cutting fiber. Adequate ventilation and respiratory protection is recommended when
cutting fiber with a hot wire or when flame laminating.
SECTION 8 – REACTIVITY DATA
STABILITY
Stable
POLYMERIZATION
Will not occur
INCOMPATIBILITY (MATERIALS TO AVOID)
None
HAZARDOUS DECOMPOSITION
PRODUCTS
Burning fiber may produce toxic decomposition products including
carbon monoxide, carbon dioxide, acetaldehyde, and other harmful
products.