Installation Guide

As Easy As 1-2-3
After removing your old tiles, simply pop your new tiles into place in your suspended ceiling.
How’s that for easy?
Edge Trim
In all likelihood, you will have some less than full-size grid squares around the perimeter
of your room. Measure each of these partial grid squares, cut your border tiles to size with
scissors or aviation snips, and then place them in your grid.
Refacing Existing Drop Ceiling Tiles
If you are refacing an existing suspended ceiling, slide your new refacing tiles (with features
projecting down and into the room) under your old ones. Sometimes a bit of wiggling (of the
stacked tiles, not your hips) is required to get your ceiling tiles to fall into place in your grid.
Drop Ceiling Lighting
Translucent ceiling tiles can be installed directly under lighting xtures, or throughout the
entirety of your grid for a fully-illuminated ceiling. In both cases, make sure your tiles are at
least 6” below your lights.
How To Install Your New Suspended Ceiling Tiles
FULL INSTRUCTIONS ONLINE AT WWW.MYNEWCEILING.COM
[phone]
Monday - Friday, 8 - 4:30 PM, Pacic
www.ceilume.com