Installation Guide

Before You Begin
Your installation surface (fancy term for “ceiling”) needs to be smooth, clean, and dry.
It is also important to pre-test your materials before installing all of your ceiling tiles to ensure
the best results for your particular installation.
Tools
You will need a tape measure, pencil, chalk line, scissors or aviation snips, and adhesive.
Measure Twice, Glue Once
Map out your ceiling. Measure and mark all of your walls, hallways, closets, and doorways.
Locate and draw any lights, heating vents, and ceiling-mount xtures. Decide and illustrate
how to best create an even border around the edges of your ceiling.
Taking into account the room variables listed above, snap two chalk lines along your ceiling’s
midpoints, forming a cross in the center of your ceiling.
Break Out the Adhesive
Apply a bead of glue around the perimeter of the backside of your ceiling tile and a simple,
How To Install Your New Direct Mount / Glue-Up Ceiling Tiles
FULL INSTRUCTIONS ONLINE AT WWW.MYNEWCEILING.COM
[phone]
Monday - Friday, 8 - 4:30 PM, Pacic
www.ceilume.com