1 2 Power switch：Long press for 2S to turn on off the power，Double-click the power switch to enter the silent mode. Pairing Indicators: ① When the connection is successful, the indicator light will be on continuously. ② Slow flashing indicator when connection fails. ③ Indicator light flashes quickly when the microphone is muted. 3 Charging indicator： 4 5 6 ① The red light starts flashing to indicate a low battery level.
15 Output port: The receiver is connected to the device (mobile phone/camera/computer, etc.) through the audio cable, with the elbow end of the cable plugged into the audio output port of the RX and the straight end connected to the recording device. There are two connection cables, the cable with the phone logo is used to connect the phone and the cable with the camera logo is used to connect the camera and the camcorder.
Connection methods 1 Receiver and cell phone connection:
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
