User Manual

Positioning & Aiming the Outdoor Antenna

Finding the best location for the outdoor antenna is the most important part of the install.

The Goal

Your aim is to  nd the best location and direction for the outdoor antenna that maximizes

signal strength and in particular, signal quality, for the frequency bands available in your area.

Set up the GO X as a Signal Meter

If you have a long power extension cable, we

recommend taking the GO X outside with you and

using the 5 ft cable included in the kit to set up the

GO X as “signal meter.”

Here are all the parts you’ll be using:

Don’t have a long power extension cable? Keep the GO X indoors near a power socket, and

use the 30 ft coax cable included in the kit to take the outdoor antenna outside. Everything

will be the same as the diagram above, except you'll use the 30 ft coax cable instead of the 5

ft jumper.

Finding the best outdoor antenna location without a power extension cable is a little bit

harder. You won’t easily be able to stay connected to the GO X via Bluetooth as you try

different locations. You may need a second person standing near the booster, watching the

Wave app to help you as you take signal readings.

Outdoor antenna

5 ft Jumper

Pigtail

Connect pigtail to

the port on the

GO X

Connect pigtail to

the port on the

GO X and

Power Supply

POWER EXTENSION

CABLE