User Manual

19
The “Advanced” Tab
12
One of the best features of the GO X is that it actively listens and decodes the cellular
signals before amplifying. You can nd out more about the system's status at any given
moment in the “Advanced” tab.
The most important information is summarized at the top of the screen, under the
"Overview" section. The information here is divided into two "radios" – the GO X's two
radios are what allow it to amplify up to two bands simultaneously.
For each radio, the advanced tab tells you if it is "scanning," or if it has found a signal and
started "boosting." When the radio is scanning, you'll notice that the frequency changes
often. Once it's boosting, the frequency will no longer change.
Once the GO X is boosting on one of the radios, the Wave app will show a percentage for
signal quality, signal strength, and antenna separation. Signal quality and signal strength
are determined by your outdoor antenna’s location and direction. Antenna separation is
determined by the separation between the indoor antennas from to the outdoor antenna.
The goal during the install is to get the highest numbers possible for each of
percentages. But sometimes, despite your best efforts, these numbers may remain low.
That's okay - they're just a guide to help you during the install.