User Manual

20
The GO X also gives a lot more diagnostic information under the "Super Channels"
dropdowns for each boosted band.
You typically won't need to use this information in most cases, but we've documented
some of the most important numbers below.
The “Send Log” button allows you send a diagnostic log from
your device if our support team needs one.
"Super Channel" Diagnostics Information
This section lists diagnostic information on the two bands
being ampli ed. Select a Radio to expand the details (as
shown).
The “Donor RSRP” value shows the signal strength being
received from the outdoor antenna.
The “Donor SINR” is a measure of signal quality. Ideally, you
want a number higher than 3 dB here. The higher the SINR, the
more bars, and the better your data rates.
The “Downlink TX Power” shows the strength of the signal
being rebroadcast. The higher this number, the greater the
coverage area. Ideally you want 0 dBm or higher.
The “Echo Gain” re ect how much separation you have
between the outdoor antenna and the and indoor antennas.
If either number is at or near 10 dB, you'd bene t from more
separation.
The Uplink and Downlink System Gain show the current
uplink and downlink ampli cation of the system. Uplink may
sometimes show 0 dB when phones aren’t in use. That’s
normal.