User's Guide

12/6/2019
20
Figure 13, NU Mounting Template
Option 2. No Template
1. To mount the NU, first determine the approximate location on the wall for the unit.
2. Hold the unit up on the wall and, using a pencil or similar marker, mark one of the top (right or left) points.
3. Using a drill, drill the location for the wall anchor.
4. Hammer in the wall anchor.
5. Place the NU in the right location and screw on the mount.
6. Make the unit as level as possible, and mark the spot for the other top mounting hole on the wall.
7. Using the drill, drill the appropriate hole where marked.
8. Hammer in the anchor, appropriately.
9. Screw in the second NU tab.