User's Guide

12/6/2019
28
Diagnostics and Testing
WAVE PRO and COMPASS
Introduction
COMPASS is a hand-held battery operated device specifically designed to simplify the installation of all QAUTRA
variants, without the need for an Internet connection to the WAVE Portal in the cloud.
NOTE: The WAVE Portal is a very powerful and time saving system. Nextivity highly recommends that you still
connect your QUATRA systems to the Internet for WAVE Portal remote management, alarms, and
diagnostics.Note: COMPASS has its own User Manual. Included here are only those items that relate specifically to
the QUATRA 4000.
CEL-FI QUATRA INSTALLATION FEATURES
Overview
When it’s not possible to open a LAN connection between a Cel-Fi QUATRA Network Unit (the NU) and the Cel-
Fi WAVE Portal, these features will help installers setup Cel-Fi systems quickly and efficiently. While complete
provisioning and optimization using the WAVE Portal is preferred, we understand that it's not always possible.
Note: Many features in the WAVE Portal are not available when using this tool. These include Commissioning,
Operator Configuration, feature settings such as “disable software updates” and access to key performance data used
in remote management.
Updating QUATRA Software
From time to time, the QUATRA 4000 firmware will be updated for feature improvements and bug fixes.
Updating QUATRA 4000 firmware can be accomplished in either of two ways:
1. Using WAVE PRO
a. Launch the WAVE PRO app.
b. Connect the LAN port on the QUATRA’s NU to an active Ethernet LAN.
c. Initiate the update from the Systems page Options menu.
i. The unit will update its firmware automatically, communicating with Nextivity’s cloud.
2. Using COMPASS
a. Update the COMPASS’ software by connecting it to an active Internet connection.
b. Connect the COMPASS to the QUATRA NU and follow the instructions on the WAVE PRO app.
Figure 19. QR Code for
WAVE PRO