User Manual
9393
www.cel-robox.com
7.0 Calibration and Maintenance
BED CLEANING WIPE
70% Isopropyl Alcohol
NOT FOR MEDICAL USE
0197
BED CLEANING WIPE
70% Isopropyl Alcohol
NOT FOR MEDICAL USE
0197
BED CLEANING WIPE
70% Isopropyl Alcohol
NOT FOR MEDICAL USE
0197
• NEVER clean the PEI print bed using Acetone or other harsh solvents/
chemicals - they are unlikely to improve adhesion, and will damage the bed
surface.
7.2.6 Build Chamber
Always try to ensure that the build chamber remains clear of debris, whether it
is mis-extruded filament or otherwise. This debris can get trapped in the various
moving parts of the machine and aect homing accuracy and motion, possibly
causing damage to Robox®.
Any debris which is fallen through into the area below the bed can be cleaned
out by removing the front tray cover (slide firmly towards you) and then tipping
forward - a gentle shake should clear it out.
To replace the cover, ensure all clips on the sides of the front tray cover are
aligned with their mating features, and then push towards the back of Robox® to
‘snap’ into place.
7.2.7 Extruder
Aer many hours of printing, there is a possibility that filament debris may have
accumulated inside the extruder. If you are having problems with loading/
unloading filament or your extruder is skipping - please see the solutions page
available at http://robox.freshdesk.com for instructions on servicing.