Specifications

13.4 Viewingatitle
To view the title of a Q–card, proceed as follows:
1 Insert the Q–card.
2 Move to the “[STORE]” menu, then press the Next button to
display the “Q–card” menu.
3 Press the [Title] soft button to display the “Title Q–Card” menu.
4 Press the Exit button, ensuring any changes have not been made.
13.5
Swapping data
It is possible to swap the data contained within a Q–card and the
console to effectively double the number of Cues, Sequences, and
Stacks available on the console.
To swap data, proceed as follows:
1 Move to the “[STORE]” menu, then press the Next button to
display the “Q–card” menu.
2 Press the [Swap] soft button.
3 Before the read or write takes place, a prompt is displayed to
confirm the operation. This is achieved by pressing the two lower
soft buttons simultaneously.
During the operation the message ‘Swapping Q-card’ is displayed
on the screen, which is cleared once complete; this takes
approximately eight seconds.
Q–cards
EPD01003 Issue 3 (30/06/94) 93