Specifications

14.3.3 Cue scrolling
Cue scrolling on the Master console operates in the normal
manner; Cue scrolling is not available on Slave consoles.
14.3.4 Masters
The Grand Master, Preset Master, and STL Master operate as
normal on the Master console; they are disabled on all Slave
consoles.
14.3.5 Stack Fader
The Stack Fader on the Master console controls the Stack operation
on the Master and all Slave consoles.
14.3.6 Cue Faders and Focuses
Programming and using Cues and Focuses is identical to that on a
single console, except that it is necessary to set the Channels on all
consoles to the levels required for the Cue.
Cue parameters
When any Cue parameters, such as fade time, Focuses, or a
sequence, is modified on the Master console, the change is sent to
all Slave consoles.
14.3.7 Non-linked functions
Some functions are not transferred from the Master to any Slave
consoles, and therefore need to be set up on each Slave:
– Gang and copy.
– Output limits.
– Channel modes (HTP/LTP).
– Cue editing (insertion and deletion of entries).
– Sequence editing (insertion and deletion of entries).
– Reading and writing to Q–cards.
Navigator Operators Manual
98 EPD01003 Issue 3 (30/06/94)