Specifications

15.1 AutoRun
See also Stacks; “[STORE] [STACK]” menu.
When a Stack is replaying, if it is in AutoRun mode Cues are taken
automatically, using the time interval specified for each entry.
The current setting is indicated on the last line of the “Root” menu:
– ‘Auto’ for AutoRun enabled.
– ‘____’ for manual mode.
Refer to Section 9.4.
15.2
Bass Button
See also Bass Step; Sound-to-Light
The Bass button enables or disables the Bass Step facility.
Refer to Section 11.4.
15.3
Bass Step
The Bass Step facility allows the bass component of a sound source
to step the Current Sequence through its steps.
To enable the Bass Step facility the Bass button should be pressed;
the LED in the button illuminates. To disable the Bass Step facility
the Bass button should be pressed again; the LED is extinguished.
Refer to Section 11.4.
Navigator Operators Manual
100 EPD01003 Issue 3 (30/06/94)