Specifications

15.4 Blind mode
See also Live mode; Preset Master.
The Navigator console can operate in either Live or Blind mode. In
Blind mode, any changes made to channel levels — using the
Rotary Presets — do not cause the output from the console to
change.
The console is in Blind mode when the Preset Master is down. The
current status is displayed on the left-hand LCD panel:
Refer to Section 5.4.
15.5
Channel Block
See also Channel Scroll; Rotary Controls; “[SETUP] [DEFAULTS]” menu.
The Channel Block setting determines how many channels are
‘scrolled’ across the Rotary Presets by the Channel Scroll rotary.
The value is set on the “[SETUP] [DEFAULTS]” menu.
Refer to Section 5.1.1.
15.6
Channel Faders
See Rotary Controls.
Quick Reference
EPD01003 Issue 3 (30/06/94) 101