Specifications

15.7 Channel Scroll
See also Channel Block; Rotary Controls; “[SETUP] [DEFAULTS]” menu.
The Navigator console has 96 channels, but only 12 Rotary Controls
on the Preset. The Channel Scroll rotary is used to determine
which channels are controlled by the Rotary Controls. The number
of the channel controlled by the left-most control is displayed on
the first line of the left-hand LCD panel:
Refer to Section 5.1.1.
15.8
Channel Scrolling
See Channel Scroll.
15.9
Chases
See Sequences.
15.10
Clear button
See also Set button.
Pressing the Clear button deselects channels on the console;LTP
and HTP channels are effected in different ways, but the effects
occur at the same time:
– all HTP channels are set to off.
– all LTP channels that are selected are deselected.
Refer to Section 5.5.3.
Navigator Operators Manual
102 EPD01003 Issue 3 (30/06/94)