Specifications

15.17 Cues
See also Cue Sequences; Stacks; Preset Focuses.
The term ‘Cue’ traditionally refers to a set lighting pattern that is
‘faded in’ by moving a Cue Fader. On the Navigator console this
concept is taken further by also incorporating Sequences and
Preset Focuses into Cues.
Refer to Section 6
15.18
“Default Patches” menu
See also Clear Patch; “[DIM PATCH]” menu; Patch 1–to–1.
Note This menu is accessed by pressing the Next button from the “[DIM
PATCH]” menu.
This menu allows one of two default Patches to be configured.
Pressing the [Patch 1–to–1] soft button configures a Patch which
connects Dimmer Channel #1 to #96 inclusive to Console Channel
#1 through #96 inclusive; and Dimmer Channel #97 to #512
inclusive to Console Channel #0 — the dummy Console Channel
— i.e. off.
Pressing the [Clear Dim Patch] soft button configures a Patch
which connects all Dimmer Channels to Console Channel #0 — the
dummy Console Channel — i.e., off.
15.19
“[DIM PATCH]” menu
See also Clear Patch; “Default Patches” menu; Patch 1–to–1.
Quick Reference
EPD01003 Issue 3 (30/06/94) 105