Specifications

This menu allows the patching of the 96 Console Channels to the
512 Dimmer Channels available on the DMX512 system to be
defined.
Note Pressing the Next button from this menu allows access to the
“Default Patches” menu from which two pre-programmed default
Patches can be configured: Clear Patch; Patch 1–to–1.
Refer to Section 12.
15.20
DMX512
This is the name of the protocol used to communicate between the
Navigator console and the lighting devices.
Refer to Section C.1.
15.21
Exit button
See also Menu system.
This button is used on the Menu system to return to a previous
menu.
Note If the LED within the button is extinguished the menu displayed
on the console is the “Root” menu.
15.22
Expansion ports
There are two expansion ports located on the back panel of the
Navigator console. These are used to interface with peripheral
equipment.
15.23
Fade (w.r.t. Sequences)
See also Sequences; Snap; “[STORE] [SEQUENCE]”.
When a Sequence is operating in Fade mode, the output levels
change gradually between steps to the new levels required, over a
period of time determined by the BPM setting.
Refer to Section 2.
Navigator Operators Manual
106 EPD01003 Issue 3 (30/06/94)