Specifications

15.38 Live mode
See also Blind mode.
The Navigator console can operate in either Live or Blind mode. In
Live mode, as changes are made to channel levels — using the
Rotary Presets — the output from the console reflects such effects.
The console is in Live mode if the Preset Master is up. The current
status is displayed on the left-hand LCD panel:
Refer to Section 5.4
15.39
LTP
HTP; “[SETUP] [CHAN MODES]” menu.
When a channel operates in Latest Takes Precedence mode —
referred to as LTP — the output level is the last level requested by
a Cue, Preset, or Sequence, controlling a channel. Any or all of the
channels can be configured to operate using the LTP convention.
Refer to Section 5.2.
15.40
MasterSelect
See also Menu system.
The Master Select control is rotated clockwise or anti-clockwise to
increment or decrement settings on the menu system.
Refer to Section 4.3.
Navigator Operators Manual
110 EPD01003 Issue 3 (30/06/94)