Specifications

– Latest Takes Precedence — LTP.
Refer to Section 5.2.
15.53
Preset Focuses
See also Cues.
The Preset Focus system is an enhancement to the ‘Cue’ facility —
refer to section 6 — as controlled by the Cue Faders. It effectively
results in a Cue Fader not only controlling a Cue, but also
‘sub-Cues’, which are referred to as Preset Focuses.
The Navigator console supports up to 36 Preset Focuses, which are
programmed in a similar manner to Cues, i.e. each Preset Focus
contains a pattern of preset channel levels. When a Preset Focus is
attached, or assigned, to a Cue, and the Cue Fader for the Cue is
moved, the channel levels are set to a combination of the patterns
contained in the Cue and the Preset Focus. Each Cue can have up
to six Preset Focuses assigned to it.
Refer to Section 7.
15.54
PresetMaster
See also Live mode; Blind mode.
The Preset Master proportionally controls all HTP channels on the
console; it does not effect LTP channels. Moreover, the position of
this master determines whether the console operates in Live or
Blind mode:
– Up for Live mode.
– Down for Blind mode.
Refer to Section 5.3.2.
Navigator Operators Manual
114 EPD01003 Issue 3 (30/06/94)