Specifications

15.58 Replaying a Cue
See also Cue Scroll; Cue Block.
A Cue is replayed by moving the Cue Fader assigned to the Cue.
– As the Cue Fader moves from the zero position to full any
HTP channels stored on the Cue fade proportionally to the
levels that are programmed.
– As the Cue Fader is moved past the trigger point (20%) the
LTP channels stored on the Cue will be set.
The Cue Scroll setting determines the number of the Cue
controlled by the left-hand Cue Fader; the other Cue Faders
control Cues that are sequentially numbered from this number.
Refer to Section 6.4.
15.59
“Root” menu
See also AutoRun; Sequences; Stacks.
The “Root” menu is the first menu displayed when the console is
switched on. This menu displays various parameters for the Stack
and Sequence facilities.
Hint An easy way to reach the “Root” menu is to repeatedly press the
Exit button until the LED within it is extinguished.
Note The “Store Options” menu is accessed from this menu by pressing
the Next button.
Navigator Operators Manual
116 EPD01003 Issue 3 (30/06/94)