Specifications

15.60 Rotary Controls
See also Channel Block; Channel Scroll.
There are 12 Rotary Controls located on the upper-half of the
console. These are rotated to increment or decrement the level of
the channel assigned to them.
Hint The Rotary Controls are functionally equivalent to Channel Faders
on conventional lighting consoles.
Refer to Section 5.5
15.61
Scroll, Channel
See Channel Scroll
15.62
Scroll, Cue
See Cue Scroll
15.63
Scrolling
See also Channel Scroll; Cue Scroll.
Scrolling is a concept which allows the Cue Faders and Rotary
Controls to control more Cues and Channels then there are
physical controls for. By using the Cue Scroll or Channel Scroll
rotaries the actual Cues and Channels controlled can be set.
Refer to Section 5.1.1; 6.1.1.
15.64
Select buttons
See also Flash buttons
Each Rotary Control has a Flash/Select button associated with it.
If the channel controlled by a Rotary Control is operated in LTP
mode,thebuttonisreferredtoasaSelect button.
Pressing a Select button allows the LTP channel associated with
the button to be modified using the corresponding Rotary Preset.
Quick Reference
EPD01003 Issue 3 (30/06/94) 117