Specifications

Refer to Section 5.5.2.
15.65
Sequences
See also Fade; Snap; Stop button “[STORE SEQUENCE]” menu.
A Sequence is a series of pre-programmed lighting states that
change incrementally at a set time interval. The Navigator can store
up to 60 different sequences, each one comprising 16 steps and a
speed setting.
A Sequence step can control one or more channels, which are
operating in HTP or LTP mode, or a combination. Thus, it is
possible to use a sequence to control lighting intensity (on a HTP
channel), movement/colour change (on a LTP channel) or a
combination of the two.
Although it is possible to have Sequences assigned to more than
one Cue, each Cue can only control one Sequence, so at any one
time it is possible to have up to 12 different Sequences running.
Refer to Section 8.
15.66
“Sequence Insert/ Delete” menu
See also “[STORE] [SEQUENCE]” menu.
Note This menu is accessed by pressing the Next button twice from the
“[STORE] [SEQUENCE]” menu.
Pressing the [Insert] soft button inserts a new step at the current
entry (with all steps after incrementing by one). Pressing the
[Delete] soft button deletes the current entry (will all steps after
decrementing by one).
Refer to Section 8.3.2.
Navigator Operators Manual
118 EPD01003 Issue 3 (30/06/94)