Specifications

15.67 Set button
See also Clear buttons.
Pressing the Set button causes all LTP channels on the console to
be selected, indicated by the LED in the corresponding Select
buttons illuminating. Pressing the Clear button deselects all
selected channels.
Refer to Section 5.5.3.
15.68
“[SETUP]” menu
The “[SETUP]” menu allows access, via the Soft buttons, to three
sub-menus:
– “[SETUP] [CHANNEL MODES]” menu.
– “[SETUP] [DEFAULTS]” menu.
– “[SETUP] [CLEAR]” menu.
Additionally, the third line on the menu shows the version number
of the Navigator software.
15.69
“[SETUP] [CHANNEL MODES]” menu
See also HTP; LTP; Precedence.
When this menu is selected the Output Precedence of the console
channels can be set. The status of each channel is indicated by the
LED in the Flash/Select button associated with it:
– Illuminated, i.e. on, for LTP.
Quick Reference
EPD01003 Issue 3 (30/06/94) 119