Specifications

– Extinguished, i.e. off, for HTP.
To modify the settings use the Channel Scroll to bring the channel
into view and press the appropriate Flash/Select buttons to set
HTP or LTP mode as appropriate.
Refer to Sections 5.2; 5.2.2.
15.70
“[SETUP] [DEFAULTS]” menu
See also Channel Block; Channel Scroll; Cue Block; Cue Scroll; Fade; Snap.
This menu allows various system parameters to be modified:
Fade
This field specifies whether Cue Sequence Fading is allowed. If
disabled, Sequences operate in Snap mode only.
Refer to Section 2.
ChanBlock
This field specifies how many channels are scrolled across the
Rotary Presets at-a-time by the Channel Scroll rotary.
Refer to Section 5.1.1.
Audio
This field specifies whether the console makes an audible ‘beep’
whenever a button is pressed or a Rotary Control used.
Cue Block
This field specifies how many Cues are scrolled across the Cue
Faders at-a-time by the Cue Scroll rotary.
Refer to Section 6.1.1.
Navigator Operators Manual
120 EPD01003 Issue 3 (30/06/94)