Specifications

15.81 Stop button
See also Sequences.
The Stop button is used to halt and restart Sequences. When
pressed the Current Sequence is stopped; the LED within the
button illuminates. To restart the Sequence the button is pressed
again; the LED is extinguished.
Refer to Section 8.5.1.
15.82
“[STORE]” menu
See also “[STORE] [CUE]” menu; “[STORE] [FOCUS]” menu;
“[STORE] [SEQUENCE]” menu; “[STORE] [STACK]” menu.
This menu allows access to four sub-menus:
– “[STORE] [CUE]” menu.
– “[STORE] [SEQUENCE]” menu.
– “[STORE] [STACK]” menu.
– “[STORE] [FOCUS]” menu.
15.83
“[STORE] [CUE]” menu
See also Cues; Preview.
Note This menu also displayed when a Cue is Previewed.
This menu allows Cues to be stored, by proceeding as follows:
1 Set the Cue field to the number of the Cue to store.
Navigator Operators Manual
124 EPD01003 Issue 3 (30/06/94)