Specifications

When this menu is entered, Sequences can be defined or modified.
The menu displays the following information:
Seq This is the number of the Sequence to edit.
Step This is the number of the current Step in the Sequence.
Chan This is the number and level of the current channel
being modified by the Rotary Controls.
Snap/Fade This field determines whether the channel levels in the
Sequence change gradually — Fade — or
instantaneously — Snap — between steps.
Loop/Stop This field determines whether the Sequence runs
continuously — Loop — or once only — Stop.
The menu uses the following Soft buttons:
[Step] This soft button should be pressed to record the current
channel levels to the current step.
[End] This soft button should be pressed after the last step has
been entered.
Note Pressing the Next button allows access to the “Store Options
(Sequence)” menu.
Refer to Section 8.
15.90
“[STORE] [STACK]” menu
See also “Stack Insert/Delete” menu; Stacks.
Navigator Operators Manual
128 EPD01003 Issue 3 (30/06/94)