Specifications

2.1 Unpacking
The Navigator console is shipped in a flight case or a cardboard
box. The following items should be present:
– One Navigator console.
– One External Power Unit.
– One IEC Power Cable.
– One Warranty Registration Card.
– Any optional accessories ordered maybe included — refer to
section 16 for details.
Should any of the items be missing or damaged in any way, contact
the supplier immediately.
1 Remove the Navigator console from its flight-case or cardboard box.
2 Make a note of the serial number, which is located on the base of
the unit — this is required to complete the Warranty Registration
Card.
3 Remove the external Power Unit and Power Cable from the
packaging.
2.2
Electricalconnection
2.2.1 External Power Units
WARNING
Before connecting power to the external Power Unit,
perform the following steps. Failure to do so may result in
permanent damage to the equipment, and could cause
severe electric shock.
The Navigator console is supplied with an External Power Unit
which is either:
– A switched-mode Auto-sensing Power Unit.
– A manual-switched Linear Power Unit.
Navigator Operators Manual
6 EPD01003 Issue 3 (30/06/94)