Specifications

4.3 Modifying parameters
On many of the sub-menus there are a number of settings, or
fields, for different parameters.
When the settings can be changed the lower two soft buttons have
the functions ‘[<]’ and ‘[>]’, which move a ‘cursor’ left or right
respectively. The cursor’s location is indicated by the field it is over
flashing on and off.
To change a setting the cursor is simply moved to the appropriate
field and the Master Select rotated clockwise or anti-clockwise to
change the value. In general, if the setting is numerical, rotating
clockwise increases it, and anti-clockwise decreases it.
Note In some menus values are displayed that can not be changed, even
though it is possible to move the cursor to their location.
The Menu System
EPD01003 Issue 3 (30/06/94) 19