Specifications

5.4 Live or Blind mode
The Navigator offers the operator the possibility of programming or
modifying the console in two modes, determined by the position
of the Preset Master:
– Up for Live Mode.
– Down for Blind Mode.
Note This effects all channels in the Preset, whether LTP or HTP.
Live mode
In Live mode, as changes are made to channel levels — using the
Rotary Presets — the output from the console reflects such effects.
Note Most lighting shows are programmed in Live mode in order that
the operator or lighting designer can fully see the effect that the
lighting has on the performer or subject.
Blind Mode
In Blind mode, any changes made to channel levels do not cause
the output from the console to change.
Note This is particularly useful when, for example, during a
performance it is necessary to make changes to an existing Cue
discreetly, without effecting the on-stage lighting.
5.5
Setting channel levels
Channel levels are modified in slightly different manners
depending upon whether they operate in HTP or LTP mode.
Controlling Channels
EPD01003 Issue 3 (30/06/94) 27