Specifications

5.5.1 HTP channels
When a channel operates in HTP mode, its level is modified by
rotating the appropriate Rotary Control clockwise or
anti-clockwise to increase or decrease the level respectively.
Also, pressing the Flash button associated with it immediately sets
the channel to full, as determined by the level of the Grand Master.
When released, the channel returns to its’ previous level.
5.5.2 LTP channels
When a channel operates in LTP mode, before its level can be
adjusted, it must first be selected. This is achieved by pressing the
Select button associated with the channel, indicated by the LED in
the button illuminating. The channel’s level is modified by rotating
the appropriate Rotary Control clockwise or anti-clockwise to
increase or decrease the level respectively. To deselect the channel
the Select button is pressed and the LED within the button is
extinguished.
Note The Flash and Select buttons are the same physical button on the
console. Whether they act as Flash buttons or Select buttons
depends upon whether the channel they refer to is operating in
HTP or LTP mode respectively.
Hint To determine the numeric setting of a channel the “Store Options”
menu can be displayed. As a channel is modified its’ setting is
automatically displayed on the third line.
5.5.3 Set/ Clearbuttons
To assist in programming, the Navigator has two buttons to quickly
select and deselect channels.
– The Set button.
– The Clear button.
Navigator Operators Manual
28 EPD01003 Issue 3 (30/06/94)