Specifications

These are particularly useful as it saves having to scroll channels in
and out of view to make global changes.
The Set button
Note The Set button has no effect upon HTP channels.
Pressing the Set button causes all LTP channels on the console to
be selected, indicated by the LED in the corresponding Select
buttons illuminating.
The Clear button
Pressing the Clear button effects LTP and HTP channels in
different ways, but the effects occur at the same time:
– all HTP channels are set to off.
– all LTP channels that are selected are deselected.
Note The output levels of the LTP channels does not change when
deselected; only the Rotary Controls no longer change the levels.
Hint This is equivalent to moving all Preset Faders to off on a
conventional lighting console.
5.5.4 The Fine Button
In normal use the level of the channel changes in steps of four, and
takes approximately three complete turns of the control to go from
off to full; this allows for levels to be reached fairly quickly.
Controlling Channels
EPD01003 Issue 3 (30/06/94) 29