Specifications

For greater sensitivity, to permit ‘fine tuning’, the Fine button can
be pressed, indicated by the LED in the button illuminating. This
provides the most sensitivity, with changes in steps of one.
Pressing the Fine button again returns the sensitivity to normal,
indicated by the LED being extinguished.
5.6
Gang
To simplify the task of programming multiple channels the Gang
function can be used to effectively connect, or gang channels
together. Any changes made to any one of the ganged channels
effects all the other ganged channels.
Hint This facility can be particularly useful to control a number of
moving lights, so that, for example, their pan and tilt settings are
linked together to produce a synchronized display.
To use the Gang facility, proceed as follows:
1 Ensure the Channel Block setting is configured appropriately for
the devices. Refer to section 5.1.1.
2 Use Channel Scroll to bring the first set of channels that are to be
ganged onto the Rotary Presets.
Note Thedevicethatisbeinggangedtofrommust be in the left-most
position on the Rotary Presets.
3 The channels to be ‘ganged’ from the device should be selected.
For LTP channels the corresponding Select buttons should be
pressed; this is indicated by the LED in the Select buttons
Navigator Operators Manual
30 EPD01003 Issue 3 (30/06/94)