Specifications

illuminating. For HTP channels the Rotary Controls should be
rotated to set their level above zero; this is indicated by the LED in
the Flash buttons illuminating.
Note There is no restriction on the number of channels in a Scroll Block
that canbe ganged together, i.e. from one to all.
4 Move to the “Store Options” menu.
5 Press the [Gang On] soft button. Gang mode is then enabled,
indicated by the message Gang=ON appearing in the left-hand LCD
panel.
Note If the soft button function displays [Gang Off]:
– Press it once to clear the current setting.
– The soft button then changes to [Gang On].
– Press the [Gang On] soft button.
6 Use the Channel Scroll to bring the next blocks of channels that are
to be ganged together onto the Rotary Presets, and press the [To]
soft button.
Note The device that is being ganged must be in the left-most position
on the Rotary Presets.
7 Repeat step 6 for all the other blocks of channels that are to be
ganged together.
Hint After selecting the channels to be ganged at step 3, pressing the
[All] soft button gangs all the corresponding channels for all the
devices on the console.
Controlling Channels
EPD01003 Issue 3 (30/06/94) 31