Specifications

7 Repeat step 6 for all the other blocks of channels that are to be
copied.
Hint After selecting the channels to be copied at step 3, pressing the
[All] soft button copies all the corresponding channels for all the
devices on the console.
5.8
Channel output limiting
An additional control over Channels is the Output Limit facility,
which effectively provides an individual master control for each
HTP channel — it has no effect on LTP channels.
Note The Output Limit is a proportional limit.
To set the Output Limits for the console channels, proceed as
follows:
1 Move to the “[OP LIMIT]” menu:
The Rotary Presets now act as Output Limit controls for the
channels, and operate in an identical manner to their function as
Rotary Presets, i.e. each Rotary Control corresponds to a channel
as determined by the Channel Scroll setting.
The left-hand LCD panel displays the scroll position for the
channels, and the right-hand LCD panel the setting for the current
channel being modified.
2 To change a setting use the Channel Scroll rotary to bring the
required channel into view and rotate the appropriate Rotary
Preset to increment or decrement the limit setting which is
displayed on the right-hand LCD panel.
Note If any limits are not at 100% this is indicated by the LED in the
corresponding Select buttons illuminating.
Controlling Channels
EPD01003 Issue 3 (30/06/94) 33