Specifications

Hint An alternative method is to use the [>] and [<] soft buttons to
move the cursor to the Channel field; rotate the Master Select to
increment or decrement the value to the required channel number;
press the [>] soft button to move the cursor to the limit field; and,
again, use the Master Select to increment or decrement the value to
Output Limit required for the channel.
Note Although it is possible to set the Output Limit on LTP channels
this has no effect on their output levels, as this facility is only valid
for HTP channels.
3 Press the Exit button.
To set the Output Limits for all the channels to the same value,
proceed as follows:
1 Move to the “[OP LIMIT]” menu.
2 Press the [All] soft button.
3 To modify the value rotate the Master Select rotary clockwise or
anti-clockwise to increment or decrement the value respectively.
4 Press the Exit button when finished.
Navigator Operators Manual
34 EPD01003 Issue 3 (30/06/94)