Specifications

4 Set the required channels to the desired levels using the Rotary
Preset controls, using the Channel Scroll if necessary to scroll the
channels into view. As the channel levels are adjusted their values
are displayed on the third line on the right-hand LCD panel.
Hint To view a channel’s level simply press the Flash button associated
with the channel.
5 Use the Cue Scroll control to bring the Cue to store into range.
Preview the Cue by pulling-back and holding the appropriate Cue
Fader, then press the Enter button to store the Cue. During the
time that the Cue is being stored the LED in the Enter button is
illuminated; this process takes approximately one second.
6 Release the Cue Fader.
6.3
Modifying Cues
Once a Cue has been stored it can have a fade time specified, or the
channel setting modified.
6.3.1 Adding time to a Cue
To assist smooth fading between Cues, particularly when
controlling moving light positions, the Navigator console can
automatically fade in a Cue over a specified time period.
Note This facility is only applicable to LTP channels within a Cue; the
level of any HTP channels is determined by the position of the Cue
Fader.
Using this facility, as the Cue Fader is moved past the trigger point
(20%), the Cue fades from its current setting to the new Cue setting
over a time period, which can be set to 0 seconds or from 0.3 to 60
seconds. To indicate that a timed fade is in progress the associated
LTP channel Flash button LEDs flash during the process.
Cue programming
EPD01003 Issue 3 (30/06/94) 39