Specifications

Hint If any channels are up or selected, i.e. the LED in their
Flash/Select buttons are illuminated, they should be deselected by
pressing the Flash/Select buttons for each channel, or the Clear
button to clear all selected channels.
6.4.1 Cue Flash buttons
Associated with each Cue Fader is a Cue Flash button. Pressing
this button is equivalent to instantaneously moving the Cue Fader
to full.
Note When a Cue Flash button is released the level of the Cue returns to
its’ previous value.
Hint To bring a Cue instantaneously to full and hold it at that setting:
press the Cue Flash button; whilst holding it down move the Cue
Fader to full; the Cue Flash button can then be released.
Cue programming
EPD01003 Issue 3 (30/06/94) 45