Specifications

7.3 Modifying a PresetFocus
To modify a Focus, proceed as follows:
1 Ensure the Grand Master is up; the Preset Master is up; and all Cue
Faders are down.
2 Move to the “[STORE] [FOCUS]” menu.
3 Use the Focus Scroll to view the desired Focus on the Focus Faders,
then preview the Focus by pulling-back and holding the
appropriate Focus Fader. Status information about the Focus is
displayed on the LCD panels.
4 Press the Mod button, which then illuminates.
5 The Focus Fader can be released.
6 The Rotary Controls are used to change the LTP channel settings,
which are reflected immediately on the console’s output. To
remove any unwanted LTP channels from the Focus, simply press
the corresponding Select button; it’s LED is extinguished.
Similarly, to add any channels to the Focus, press the
corresponding Select button; it’s LED is illuminated.
7 To confirm the changes made, Enter should be pressed; to
abandon any changes Mod should be pressed.
Note There is no ‘undo’ facility. To cancel any changes made, the only
way to achieve this is to repeat the above process and manually
reset the levels to their previous values.
Preset Focuses
EPD01003 Issue 3 (30/06/94) 51