Specifications

Note If the console is in Live mode, i.e. the Preset Master is up, the
changes made are reflected immediately on the console’s output. If
in blind mode, i.e. the Preset Master is down, as each channel is
modified its level is displayed on the third row of the right-hand
LCD panel.
5 To confirm the changes made, the [Step] soft button should be
pressed.
Note There is no ‘undo’ facility to cancel any changes made. The only
way to achieve this is to repeat the above process and manually
reset the levels to their previous values.
8.3.2 Inserting and deleting steps
To insert or delete a step, perform the following:
1 Move to the “[STORE] [SEQUENCE]” menu.
2 Press the Next button twice to display the“Sequence
Insert/Delete” menu.
3 Select the Sequence to edit by using the [<] and [>] soft buttons to
move the cursor to the Seq field, and rotate the Master Select to
increment or decrement the value to the required setting.
4 Select the number of the Step to insert or delete by using the [>]
and [>] soft buttons to move the cursor to the Step field, and rotate
the Master Select to increment or decrement the value to the
required setting.
Cue Sequence programming
EPD01003 Issue 3 (30/06/94) 61