Specifications

5 Press the [Insert] soft button to insert a new step at the current
step, with all steps after incrementing by one; press the [Delete]
soft button to delete the current step.
6 Press the Next buttontoreturntothe“StoreSequence”menu.
Note If a step has been inserted the entry should be modified to set the
channel levels for that step as required.
8.4
Assigning Sequences
Once a Sequence has been defined, using the procedure described
above, it needs to be assigned to a Cue Fader before it to can be
replayed.
– Each Cue can only have one Sequence assigned to it.
– Any Sequence can be assigned to any Cue Fader.
– A Sequence can be assigned to more than one Cue Fader.
To assign a Sequence to a Cue, proceed as follows:
1 Use the Cue Scroll control to bring the Cue to assign a Sequence to
into range. Preview the Cue by pulling-back and holding the
appropriate Cue Fader. Information about the Cue is displayed on
the LCD panels.
2 Press the [>] softbuttontomovethecursortotheSeq field.
Note The cursor is initially on the right-hand LCD panel, and the [>] soft
button needs to be pressed 10 times to move to the Seq field, which
is located on the left-hand LCD panel.
3 Use the Master Select to increment or decrement the number until
the required Sequence number is reached.
4 Release the Cue Fader.
Navigator Operators Manual
62 EPD01003 Issue 3 (30/06/94)