Specifications

8.5 Replaying Sequences in Cues
To replay a Sequence assigned to a Cue Fader, the appropriate Cue
Fader is simply moved above zero.
Remember that:
– LTP channels will trigger when the Cue Fader is past the
trigger point (20%).
– HTP channels are proportional to the position of the Cue Fader.
– When the channel is operating in HTP mode, the level will be
the higher of the Cue or Sequence setting.
– When the channel is operating in LTP mode, the level will be
the last setting to effect it, irrespective of whether from a
Sequence or a Cue.
Hint Before replaying a Cue press the Clear button to clear the Preset.
8.5.1 Pausing a Sequence
To pause a Sequence the Stop button can be pressed; the LED
within the button illuminates. To restart the Sequence press the
Stop button again; the LED is extinguished.
8.5.2 Running multiple Sequences
The Navigator console allows up to 12 Sequences to be played back
simultaneously, each one controlled by one of the Cue Faders.
Each Cue Fader is simply set above zero and the Sequence
assigned to it replays.
Cue Sequence programming
EPD01003 Issue 3 (30/06/94) 63