Specifications

2 Press [>] to move the cursor to the Seq field. This field indicates the
Currently Controlled Sequence number; by rotating the Master
Select the number can be incremented or decremented to reach the
required value.
The following should be noted:
– If all Cue Faders are down (in Live Mode) when the “[STORE]
[SEQUENCE]” menu is selected the LED in the Stop button
illuminates, thus indicating that the Controlled Sequence is
stopped and set to step number 1, ready for programming. The
LED in the Stop button remains illuminated even if another
Sequence is selected.
– If a Cue Fader with an assigned Sequence is up (in Live Mode)
when the “[STORE] [SEQUENCE]” menu is selected the LED
in the Stop button, again, illuminates, thus indicating the
Sequence is stopped and ready for programming. However, in
this case the Step number shows the step that the Sequence
was on when the “[STORE] [SEQUENCE]” menu was entered.
Cue Sequence programming
EPD01003 Issue 3 (30/06/94) 65