Specifications

3 Set the number of the Stack to edit. This is in the range one to four
inclusive.
Note If the Stack selected contains any settings, these will be overwritten.
4 Ensure the Entry field has a value of 1.
5 Set the number of the Cue to ‘take’.
6 Set the fade Time associated with the Stack item.
Note The fade time is the time, in seconds, that it takes for the current
entry to fade out and the next entry to fade in. Cues on the Stack
containing HTP channels therefore ‘cross fade’; Cues containing
LTP channels are triggered immediately.
Hint Numerous interesting effects can be created by varying the Stack
‘cross fade’ time and Cue fade times.
7 Press the Enter button to store the changes.
Note The entry number automatically increments, ready for details of
the next Cue to be entered.
8 Repeat steps 5 to 7 for all the Cues required.
9 Press the [End] soft button to mark the last entry.
9.3
Modifying entries
Once a Stack has been programmed, it can be modified, allowing
entries to be edited, inserted, or deleted.
9.3.1 Editing an entry
To change, or edit, an entry, proceed as follows:
1 Move to the “[STORE] [STACK]” menu.
Stacks
EPD01003 Issue 3 (30/06/94) 69