Specifications

2 Select the entry to edit by using the [>] and [<] soft buttons to
move the cursor to the Entry field, and rotate the Master Select to
increment or decrement the value to the required setting.
3 Use the [>] and [<] soft buttons to move the cursor to the other
field as required, and rotate the Master Select to increment or
decrement the new values.
4 Press the Enter button to confirm the changes.
9.3.2 Inserting and deleting entries
To insert or delete an entry, proceed as follows:
1 Move to the “[STORE] [STACK]” menu.
2 Select the entry number to insert or delete, by using the [>] and [<]
soft buttons to move the cursor to Entry field, and the Master Select
to increment or decrement the value to the required setting.
3 Press the Next button to display the “Stack Insert/Delete” menu.
4 Press [Insert] to insert a new step at the current entry (with all
steps after incrementing by one); press [Delete] to delete the
current entry.
5 Press Next to return to the “[STORE] [STACK]” menu. The cursor
is placed at the Stack field; move to the Cue field to change the Cue
number if required.
Note When a new entry is inserted it is automatically assigned to Cue #2.
Navigator Operators Manual
70 EPD01003 Issue 3 (30/06/94)