Specifications

9.4 AutoRun/ Manual replay
Each Stack has a parameter which allows the Cues to be taken
automatically, using the time interval specified for each Cue — this
is referred to as AutoRun mode.
Note The fade time is the time, in seconds, that it takes for the current
entry to fade out and the next entry to fade in. Cues on the Stack
containing HTP channels therefore ‘cross fade’; Cues containing
LTP channels are triggered immediately.
To set the replay mode, proceed as follows:
1 Move to the “Root” menu.
2 Use the [>] and [<] soft buttons to move the cursor to the Auto field,
and rotate the Master Select to enable or disable AutoRun mode,
indicated by the field displaying ‘Auto’ or ‘____’ respectively.
9.5
Replaying a Stack
To replay Cue entries in a Stack, the following operations are
necessary:
– The number of the Stack to replay from has to be set.
– The Cue entries in the Stack have to be ‘taken’ (if AutoRun is
not set).
9.5.1 Selecting the Stack to replay
To select the Stack from which Cues are to be taken, perform the
following:
1 Move to the “Root” menu.
Stacks
EPD01003 Issue 3 (30/06/94) 71