Specifications

2 Use the [>] and [<] soft buttons to move the cursor to the Stack
field, and rotate the Master Select to increment or decrement the
value to set the number of the Stack to replay.
Note If this field is set to ‘ /‘, this indicates that no Stacks are currently
selected to replay.
9.5.2 AutoRun replay
When AutoRun mode is enabled (i.e. the AutoRun field on the
“Root” menu shows Auto the Cues in the Stack are taken
automatically at the time interval specified for each entry.
Note In AutoRun mode, the position of the Stack Fader must be fully up
or down, and to execute AutoRun the Go button should be pressed.
Pauses
If a time interval of 0 (zero) is encountered the Stack pauses,
indicated by the LED in the Go button illuminating. Pressing the
Go button causes the Stack to continue.
9.5.3 Manual replay
When AutoRun is disabled (i.e. the AutoRun field on the “Root”
menu shows shows ‘____‘), each Cue in the Stack has to be ‘taken’
manually. This is achieved using, either:
– The Stack Fader.
– The Go button.
– An external trigger.
– or a combination of all the above.
Using the Stack Fader
The Stack Fader allows each Cue in the Stack to be taken and faded
across manually.
To replay the next Cue the Stack Fader is moved from one end of
its traverse to the other, i.e. 0% to 100% or 100% to 0%.
Navigator Operators Manual
72 EPD01003 Issue 3 (30/06/94)