Specifications

10.3 Advanced previewing
As detailed in section 6.2.1 Cues are previewed by pulling-back and
holding the appropriate Cue Fader.
However, if the Cue Fader is released and then immediately
pulled-back and held again the Sequence assigned to the Cue is
previewed; this technique is referred to a double-previewing.
Similiarly, if this process of releasing and then immediately
pulling-back and holding the Cue Fader is repeated the Focuses
assigned to the Cue are subequently previewed.
The elements of the Cue previewed are, in order:
– The Cue.
– The Sequence, if any, assigned.
– The first Focus, if any, assigned.
– The second Focus, if any, assigned.
– The thrid Focus, if any, assigned.
– The fourth Focus, if any, assigned.
– The fifth Focus, if any, assigned.
– The sixth Focus, if any, assigned.
When an element is previewed it can be modified by pressing the
MOD button, which then illuminates. After the changes have been
made, the Enter button should be pressed; pressing the MOD
button at this point abandons any changes made.
Advanced Cue Programming
EPD01003 Issue 3 (30/06/94) 77